Wiren Board 6.7: Peripherals/en: различия между версиями

Wiren Board 6.7: Peripherals/en (просмотреть исходный код)

12 байт добавлено , 1 год назад

Нет описания правки

translator, wb_editors

4285

правок

@@ Строка 105: / Строка 105: @@
 |/dev/ttymxc1
 |/dev/ttyRS485-1
-| Signed "RS-485," terminal blocks A and B
+| Signed ''RS-485'', terminal blocks A and B
 | Uninsulated port, terminator installed
 |-
 |/dev/ttymxc3
 |/dev/ttyRS485-2
-| Signed "RS-485," terminal blocks A/L and B/H (this port can be used as CAN)
+| Signed ''RS-485'', terminal blocks A/L and B/H (this port can be used as CAN)
 | Uninsulated port, terminator installed, multiplexed with CAN
 |-
@@ Строка 116: / Строка 116: @@
 |/dev/ttyMOD1
 | UART on the extension module MOD1
-| To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)"
+| To appear, you need to set in wb-hardware.conf «Expose UART Pins (DIY)»
 |-
 |/dev/ttymxc4
 |/dev/ttyMOD2
 | UART on the extension module MOD2
-| To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)"
+| To appear, you need to set in wb-hardware.conf «Expose UART Pins (DIY)»
 |-
 |/dev/ttymxc5
 |/dev/ttyMOD3
 | UART on the extension module MOD3
-| To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)"
+| To appear, you need to set in wb-hardware.conf «Expose UART Pins (DIY)»
 |-
 |/dev/ttymxc6
 |/dev/ttyMOD4
 | UART on the extension module MOD4
-| To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)"
+| To appear, you need to set in wb-hardware.conf «Expose UART Pins (DIY)»
 |-
 |/dev/ttymxc7