Перейти к содержанию

Навигация

Создание microSD-карты с образом/en: различия между версиями

Нет описания правки
Метки: правка с мобильного устройства правка из мобильной версии
Строка 31: Строка 31:
*find out the name of the device corresponding to the map. This is usually /dev/mmcblk0 or /dev/sdX (where X is the letter). This command can help  <pre>dmesg | tail</pre>
*find out the name of the device corresponding to the map. This is usually /dev/mmcblk0 or /dev/sdX (where X is the letter). This command can help  <pre>dmesg | tail</pre>
*:<b> Do not confuse the device name! Incorrectly specifying the name of the device, you will lose all data on your computer forever!</b>
*:<b> Do not confuse the device name! Incorrectly specifying the name of the device, you will lose all data on your computer forever!</b>
*umount partitions of the map I remontiroval Linux automatically:
*unmount the map partitions that Linux mounted automatically:
**if the device is called / dev /mmcblk0, the partitions are called/dev /mmcblk0p1,/dev /mmcblk0p2, etc.
**if the device is called / dev /mmcblk0, the partitions are called/dev /mmcblk0p1,/dev /mmcblk0p2, etc.
**if the device is called / dev /sdb, the partitions are/dev /sdb1,/dev /sdb2, etc.
**if the device is called / dev /sdb, the partitions are/dev /sdb1,/dev /sdb2, etc.
translator, wb_editors
4293

правки