История
3 июля 2019
Новая страница: «== Technical details == The relay control signals are on the SDA (K1) and SCL (K2) contact of the extension module.»
−67
Новая страница: «The illustrations show the wiring diagrams of the LED and relay.»
−52
Новая страница: «The load is connected as follows: "plus" load is connected to the power supply, "minus" is connected to the transistor output. For the load to start working, you…»
−187
Новая страница: «== Connection == thumb|400px|LED connection example thumb|400px|Relay connection example»
−88
Новая страница: «== MQTT == {| class="wikitable" !Slot !Terminal !Output !Channel (MQTT) !Topic (MQTT) |- | rowspan="2" |MOD1 |O1 |K1 |wb-gpio/MOD1_K1 |/devices/wb-gpio/controls/M…»
−20
Новая страница: «When adding a device is detected immediately, a reboot is not required.»
−69
Новая страница: «Once added, two additional outputs appear in the Devices next to the controller outputs (the Discrete I/O section).»
−80
Новая страница: «Select "WBE-DO-OC-2: Dual Open-Collector Output Module" in the Internal slot 1 or 2 section (depending on the slot number) and click Save.»
−46
Новая страница: «==Configuration== Configuration of the web interface is carried out in the section Configs => Hardware Modules Configuration.»
−51
Новая страница: «{| class="wikitable" !Terminal !Function |- |O1 |K1 |- |O2 |K2 |- |O3 |GND |}»
−10
Новая страница: «== Pinout ==»
−14
Новая страница: «{| class="wikitable" !Parameter !Value |- |Number of outputs |2 |- |Output type |N-channel field effect transistor (open collector) |- |Contact configuration |SPS…»
−401
Новая страница: «The ground (GND) of the load must be connected to the GND terminal of the module (O3 terminal of the extension module).»
−38
Новая страница: «Each channel has built-in protection against voltage surges when switching inductive load (TVS for 30V).»
−93
Новая страница: «The module contains two N-channel transistors with common ground.»
−43
Новая страница: «== Технические характеристики == thumb|WBE-DO-OR-2 for Wiren Board 5»
−78
Новая страница: «200px|thumb|right|Output contact diagram»
−22
Новая страница: «The module is designed to control dry contact inputs, as well as for switching low-voltage load.»
−108
Новая страница: «WBE-DO-OS-2 open collector output module»
+4097