12 063
правки
(Новая страница: «In devices with firmware version "'3.1.0"' and later it is also possible to change the settings of data exchange parameters — see #register Map|Modbus registe…») |
(Новая страница: «The control of the IR receiver is made through the flags of Modbus registers; a full list can be found in the description of the map registers. There are 3 types…») |
||
Строка 32: | Строка 32: | ||
In devices with firmware version "'3.1.0"' and later it is also possible to change the settings of data exchange parameters — see [[#register Map|Modbus register map]]. | In devices with firmware version "'3.1.0"' and later it is also possible to change the settings of data exchange parameters — see [[#register Map|Modbus register map]]. | ||
The control of the IR receiver is made through the flags of Modbus registers; a full list can be found in the description of the map registers. There are 3 types of operations with signals: | |||
* | * entry signal in the memory with the remote control, | ||
* | * play a signal from memory, | ||
* | * edit the signal in memory. | ||
Only one operation can be performed on only one signal at a time. Since during the execution of any operation one of the registers of flags is set to 1, and after the operation is completed there is set to 0, at any time among all the registers of flags related to the IR transceiver, only one register can be set to one. Attempting to write 1 to IR-related flag registers with an existing unit will result in a <code>BUSY</code>error. | |||
== Постоянный режим == | == Постоянный режим == |
правки