WB-MSx Consumer IR Manual/en: различия между версиями

Новая страница: «As in the case of registers of the permanent storage every time you can only perform one operation only one signal. Since during the execution of any operation on…»
(Новая страница: «The control of the IR receiver is made through the Modbus registers flags (a full list can be found in Coils). There are 3 types of operations with sig…»)
(Новая страница: «As in the case of registers of the permanent storage every time you can only perform one operation only one signal. Since during the execution of any operation on…»)
Строка 77: Строка 77:
* in future versions it is expected to implement direct write from the operational buffer to ROM.
* in future versions it is expected to implement direct write from the operational buffer to ROM.


Как и в случае работы с регистрами постоянного хранения, в каждый момент времени можно выполнять только одну операцию только над одним сигналом. Так как во время выполнения любой операции в один из регистров флагов ставится 1, а после завершения операции туда же ставится 0, в каждый момент времени среди всех регистров флагов, относящихся к ИК-приёмопередатчику, только один регистр может быть установлен в единицу. Попытка записи 1 в регистры флагов, связанных с ИК, при уже имеющейся единице приведёт к ошибке <code>BUSY</code>.
As in the case of registers of the permanent storage every time you can only perform one operation only one signal. Since during the execution of any operation one of the registers of flags is set to 1, and after the operation is completed there is set to 0, at any time among all the registers of flags related to the IR transceiver, only one register can be set to one. Attempting to write 1 to IR-related flag registers with an existing unit will result in a <code>BUSY</code> error


=== Удаление всех сигналов из постоянной памяти ===
=== Удаление всех сигналов из постоянной памяти ===
12 063

правки