Translations:Sensors Modbus Management/19/en: различия между версиями
(Новая страница: «{| border="1" class="wikitable" style="text-align:center" !Starting address || Quantity || Purpose || In modifications !From firmware version |- | 0 || 1 || style…») |
|||
Строка 3: | Строка 3: | ||
!From firmware version | !From firmware version | ||
|- | |- | ||
| 0 || 1 || style="text-align:left" |Enable buzzer (buzzer) || WB- | | 0 || 1 || style="text-align:left" |Enable buzzer (buzzer) || WB-MSW v.3, WB-MSW2 | ||
| | | | ||
|- | |- | ||
| 1 || 1 || style="text-align:left" | Forced calibration of the built-in CO2 sensor. Turn on after 20 minutes of operation at a CO2 level of 400 ppm || WB-MSW2 | | 1 || 1 || style="text-align:left" | Forced calibration of the built-in CO2 sensor. Turn on after 20 minutes of operation at a CO2 level of 400 ppm || WB-MSW v.3, WB-MSW2 | ||
| | | | ||
|- | |- | ||
| 2 || 1 || style="text-align:left" | Turn on the heating (heater) in the temperature and humidity sensor chip HDC1080 || WB-MS | | 2 || 1 || style="text-align:left" | Turn on the heating (heater) in the temperature and humidity sensor chip HDC1080 || WB-MS, WB-MSW v.3, WB-MSW2 | ||
|3.2.0 | |3.2.0 | ||
|- | |- | ||
|3 | |3 | ||
|1 | |1 | ||
| | |Power on/off of the CO2 sensor | ||
|WB-MSW V. 3 | |WB-MSW V. 3 | ||
|4.1.0 | |4.1.0 | ||
|- | |- | ||
| 10 || 1 || style="text-align:left" | Green led on || WB-MSW | | 10 || 1 || style="text-align:left" | Green led on || WB-MSW v.3 | ||
| | | | ||
|- | |- | ||
| 11 || 1 || style="text-align:left" | Enable red led || WB-v | | 11 || 1 || style="text-align:left" | Enable red led || WB-MSW v.3 | ||
| | | | ||
|- | |- | ||
|} | |} |
Текущая версия на 22:39, 29 марта 2020
Starting address | Quantity | Purpose | In modifications | From firmware version |
---|---|---|---|---|
0 | 1 | Enable buzzer (buzzer) | WB-MSW v.3, WB-MSW2 | |
1 | 1 | Forced calibration of the built-in CO2 sensor. Turn on after 20 minutes of operation at a CO2 level of 400 ppm | WB-MSW v.3, WB-MSW2 | |
2 | 1 | Turn on the heating (heater) in the temperature and humidity sensor chip HDC1080 | WB-MS, WB-MSW v.3, WB-MSW2 | 3.2.0 |
3 | 1 | Power on/off of the CO2 sensor | WB-MSW V. 3 | 4.1.0 |
10 | 1 | Green led on | WB-MSW v.3 | |
11 | 1 | Enable red led | WB-MSW v.3 |