Translations:Rule Examples/23/en: различия между версиями

Translations:Rule Examples/23/en (просмотреть исходный код)

10 байт добавлено , 1 год назад

Нет описания правки

translator, wb_editors

4433

правки

Версия 20:28, 21 сентября 2022 (просмотреть исходный код) Matveevrj (обсуждение \| вклад) (Новая страница: «In the example, the motion sensor is connected to the "dry contact" input, control type "switch". The siren is connected to the built-in Wiren Board relay, and the lamp is connected to the relay box via Modbus. When the "dry contact" input (motion sensor output) is closed, "1" is supplied to the lamp and the relay, and "0" when it is off.»)		Текущая версия на 21:52, 21 сентября 2022 (просмотреть исходный код) Matveevrj (обсуждение \| вклад)
Строка 1:		Строка 1:
	In the example, the motion sensor is connected to the ~~"dry contact"~~ input, control type ~~"switch"~~. The siren is connected to the built-in Wiren Board relay, and the lamp is connected to the relay box via Modbus. When the ~~"dry contact"~~ input (motion sensor output) is closed, ~~"1"~~ is supplied to the lamp and the relay, and ~~"0"~~ when it is off.		In the example, the motion sensor is connected to the «dry contact» input, control type «switch». The siren is connected to the built-in Wiren Board relay, and the lamp is connected to the relay box via Modbus. When the «dry contact» input (motion sensor output) is closed, «1» is supplied to the lamp and the relay, and «0» when it is off.