7831
правка
Fizikdaos (обсуждение | вклад) (Новая страница: «Debug port on the controller placed into three-pin: GND, RX and TX. To connect: # Insert the USB-UART Adapter into your computer. # Plug the connector pins to the…») |
Fizikdaos (обсуждение | вклад) |
||
Строка 3: | Строка 3: | ||
# Plug the connector pins to the pins of the adapter according to the scheme: | # Plug the connector pins to the pins of the adapter according to the scheme: | ||
## GND to GND | ## GND to GND | ||
## TX to RX | |||
## RX to the TX | ## RX to the TX | ||
#: <I> (note: some adapters confused labeling - in this case, try to connect the TX to the TX and RX to RX) </ i> | #: <I> (note: some adapters confused labeling - in this case, try to connect the TX to the TX and RX to RX) </ i> |