WBC-4G v.2/en: различия между версиями

[[File:WB7+Modem.png|300px|thumb|right| WBC-4G v.2 module installation in Wiren Board 7 controller]]

#Insert the SIM card.

#Put the case back together.

#Screw the external antenna onto the SMA socket.

When mounting in a metallic shield for reliable radio communication, place the antenna outside.

== Configuring Internet Connection ==  

Refer to the instruction for setting up the internet connection via a 4G modem in the article [[GSM/GPRS#Internet with 4G Modem (LTE)|GSM/GPRS]].

Note that the 4G network does not operate in all regions.  

To check the current setting, use <code>AT+CNMP?</code>.

Switching modem to automatic network selection mode is performed with the command: <code>AT+CNMP=2</code>.

To find out the version number of the chip, you can use the AT command <code>at+cgmr</code>, which returns a string with the number, where characters 6 to 8 will indicate the chip version. See [[GSM/GPRS#Отправка AT-команд|How to send an AT command]] for more information.

[[Modem a76xx flashing| SIMCom A76xxE-H Modem Flashing Guide]]

|-

|}

== Images and device schematics ==

Image:WBC-4G v2.png | Front side of the module  WBC-4G v.2 for WB6 and WB7

Image:WBC-4G bot v2.png | Reverse side of the module WBC-4G v.2 for WB6 and WB7