WB AC rev. E2.0/en: различия между версиями
(Новая страница: «{| border="1" width="700" class="wikitable" style="text-align:center" | '''signature''' || '''Max. V, I''' | width="10%" | '''state''' '''default''' | width="…») |
(Новая страница: «|'''RS-485 A''' |18V |0V |RS-485 port |- |'''RS-485 B''' |18V |<nowiki>+5V</nowiki> |») |
||
Строка 50: | Строка 50: | ||
|18V | |18V | ||
|0V | |0V | ||
| | |[[RS-485/en|RS-485]] port | ||
|- | |- | ||
|'''RS-485 B''' | |'''RS-485 B''' |
Версия 20:26, 19 июля 2019
Stand-alone/network IP access controller with built-in MIFARE card reader 'WB-AC-3' is a replacement of traditional access controllers, and allows you to read cards, process information from them, communicate with a remote database, manage locks without additional devices.
The device works with ISO 14443 cards, including the entire MIFARE card family: Classic, Ultralight, DESFire, Plus (including many transport and “social” cards), and also allows you to read PayPass/payWave payment cards. Data exchange with NFC-enabled smartphones is also supported.
Up to two locks can be connected directly to the device via transistor outputs, as well as door opening buttons and sensors. The WB-AC-4 access controller has an RS-485 port through which additional external readers can be connected. It is also possible to connect Wiegand readers, numeric keyboards, etc.
The controller is connected to a data network via Ethernet or RS-485 interface. Option is available with Wi-FI 802.11 n.
The controller is powered either from the power supply (9-28V, 10 W), or through the Ethernet connector one by one with the data cable (passive Power over Ethernet technology for free pairs, voltage up to 24V).
For more information about devices connection see : Wiren Board 5: Подключение периферийных устройств
Terminals
Physical location
FET_1 | FET_2 | V+ | V+ | GND | W1- | W1+ |
V+ | GND | RS-485 A | RS-485 B | GND | B2 | B1 |
Types
signature |
Max. V, I | state default | Functions |
FET_1 | 30V, 2A | High Z | Open collector outputs |
V+ | 18V | Input voltage | |
GND | GND | ||
RS-485 A | 18V | 0V | RS-485 port |
RS-485 B | 18V | +5V | |
W2- | 5V, 0.5A | 5V | Цифровой вход, подключение считывателей Wiegand, подключение кнопок (сухой контакт) |
W2+ | |||
W1- | 5V, 0.5A | 5V | Цифровой вход, подключение считывателей Wiegand, подключение кнопок (сухой контакт) |
W1+ | |||
B1 | 5V, 0.5A | 5V | Цифровой вход, подключение кнопок (сухой контакт) |
B2 | 5V, 0.5A | 5V |
RFID
Hardware
Устройство работает с картами стандарта ISO 14443, в том числе со всем семейством карт Mifare: Classic, Ultralight, DESFire, Plus (в том числе многими транспортными и “социальными” картами), а также позволяет считывать платёжные карты PayPass/payWave. Поддерживается также обмен данными с смартфонами, поддерживающими NFC.
Software
Работа с NFC и RFID осуществляется через библиотеку libnfc.