WBIO-DI-HVD-16 16-Channel 230V Detector Module/en: различия между версиями
(Новая страница: «== Device pictures and drawings == {{WBPicturesNoDrawing|1}}») |
FuzzyBot (обсуждение | вклад) м (FuzzyBot переименовал страницу Модуль наличия 220В (WBIO-DI-HVD-16)/en в WBIO-DI-HVD-16 16-Channel Checking 230V/en без оставления перенаправления: Часть переводимой страницы Модуль наличия 220В (WBIO-DI-HVD-16).) |
(нет различий)
|
Версия 12:34, 22 апреля 2021
Purpose
Control of contactors, circuit integrity, etc.
Technical specifications
Contains 16 inputs to determine the presence of 220V. The operating voltage of the inputs is 50V-250V AC.
Parameter | Value |
---|---|
Number of inputs | 16 |
Isolated input groups | 2 |
Input type | voltage input |
Operating voltage | 50V AC |
Rated voltage | 230V AC |
Response time (230V AC), not more than | 100 ms |
Isolation voltage between input and controller | 5000Vrms |
Module type | I (inverted addr.) |
Maximum power consumption | 1 mW |
Width, DIN units | 3 |
Size | 53.3x90.2x57.5 mm |
Terminals and wire section | |
---|---|
The recommended wire cross section with pin bushing insulated tip, mm2 | 2,5 |
Standard sleeve length of pin bushing insulated tip, mm | 8 |
Tightening torque of screws, Н∙м | 0,5 |
Connection to the controller
See Activating the modules in the web interface of the controller
Connection
The inputs are separated by two isolated terminal groups: (1,2,3,4,5,6,7,8, N) and (N,9,10,11,12,13,14,15,16). N is a common zero for a group of inputs.
Device pictures and drawings
По ссылкам ниже вы можете скачать изображения и чертежи устройства WBIO-DI-HVD-16.
Corel Draw 2018: WBIO-DI-HVD-16.cdr.zip
Corel Draw PDF: WBIO-DI-HVD-16.cdr.pdf
Autocad 2013 DXF: Мы еще не подготовили чертеж этого устройства. Вы можете запросить чертеж устройства "voltage detection Module 220 V WBIO-DI-HVD-16" на портале техподдержки Wiren Board (необходима регистрация).