Source project
|
Version
|
Affected devices
|
Changelog
|
WB-MDM2
|
1.1.0
|
WB-MD2
|
Two modbus holding registers 65 and 66 were added for users can choose 1 of 3 dimming curves: (0)incandecent bulbs, (1)LED bulbs, (2)resistive load
|
WB-MS
|
3.10.1
|
WB-MS, WB-M1W2, WB-MIR
|
1-wire reset time changed from ~410 us to ~550 us. As in 1-Wire Standard, should be between 480 and 640 us
|
WB-MS
|
3.10.0
|
WB-MS, WB-M1W2, WB-MIR
|
added filter out algorithm for suspicious values 85C and 127.937C from 1-wire temperature sensors
|
WB-MRGB
|
1.1.1
|
WB-MRGBW-D
|
- Storing configs and device state in external eeprom
- Watchdog enable
- change: add MRGBW support
* note: modbus hold reg 3 = white channel value
modbus hold reg 8 = button 3 value
button3 short press = on/off white channel
button3 long press = adjust brightness of white channel
modbus hold reg 33 = button 3 counter
- change: "BUTTON_DISABLED" register state is stored/restored to eeprom
- change: Effectless "color changed over modbus" feature removed
|
WB-MAP
|
1.1
|
WB-MAP3H, WB-MAP3E, WB-MAP6S, WB-MAP12H
|
add support for WB-MAP3 devices
|