Wiren Board 5: GPS/Glonass Extension Module
Версия от 17:44, 14 января 2016; Fizikdaos (обсуждение | вклад) (Новая страница: «{| class="wikitable" !Extension module !Serial port !PPS GPIO |- |MOD1 |''/dev/ttyAPP2'' |91 |- |MOD2 |''/dev/ttyAPP3'' |83 |}»)
Extension module with GPS/Glonass module SIM68M.
Determination of coordinates.
The time calibration signal.
Antenna
The module is not equipped with an antenna. Antenna connection is made through u.FL. connector.
When ordering the controller Wiren Board with the module, SMA type antenna connector installed on enclosure connector .
Power supply antenna: 3.3V.
Data
The data come from the module in the format NMEA. To work in Linux, you can use the software gpsd from our repository, or any other.
Data interchange with the module via the serial port.
Connection parameters: 9600 8N2.
PPS signal is input to the "CS" extension slot.
Operation in Wiren Board 5
Extension module | Serial port | PPS GPIO |
---|---|---|
MOD1 | /dev/ttyAPP2 | 91 |
MOD2 | /dev/ttyAPP3 | 83 |