Translations:Disassembling the controller case/14/en

Версия от 20:32, 17 августа 2022; Matveevrj (обсуждение | вклад)
  1. Place the controller board in the case.
  2. Make sure the On/Off switch on the front panel is in its aperture. Do not apply excessive force to avoid damaging the switch.
  3. Slightly bend back the side wall of the case where a connector for linking external modules is located. Gently press the board into the case so that the connector fits into the opening in the side of the case.
  4. Install the back cover. Lid latches should click into place.
Источник — https://wirenboard.com/wiki/index.php?title=Translations:Disassembling_the_controller_case/14/en&oldid=66490