Все переводы
Введите имя сообщения для показа всех доступных переводов.
Найдено 2 перевода.
Сообщение | Текущий текст |
---|---|
ист. английский (en) | # Disable hotspot mode. #: To do this, in the <code>/etc/default/hostapd</code> file, comment out the line (e.g., add the '''#''' sign at the beginning of the line) <syntaxhighlight lang="bash">#DAEMON_CONF="/etc/hostapd.conf"</syntaxhighlight> # Edit <code>/etc/network/interfaces</code>: #* comment out the lines related to the setting in access point mode: <syntaxhighlight lang="bash"> #iface wlan0 inet static # address 192.168.42.1 # netmask 255.255.255.0 </syntaxhighlight> #* uncomment and edit the lines (or add them if there were none): <syntaxhighlight lang="bash"> auto wlan0 iface wlan0 inet dhcp wpa-ssid {ssid} # replace {ssid} with the name of the hotspot wpa-psk {password} # replace {password} with your own password </syntaxhighlight> # To apply the changes, run the following commands <syntaxhighlight lang="bash"> ifdown wlan0 ifup wlan0 </syntaxhighlight> |
ист. русский (ru) | # Отключите режим точки доступа. #: Для этого в файле <code>/etc/default/hostapd</code> закомментируйте строку (то есть добавьте знак '''#''' в начало строки)<syntaxhighlight lang="bash">#DAEMON_CONF="/etc/hostapd.conf"</syntaxhighlight> # Отредактируйте <code>/etc/network/interfaces</code>: #* закомментируйте строки, относящиеся к настройке в режиме точки доступа: <syntaxhighlight lang="bash"> #iface wlan0 inet static # address 192.168.42.1 # netmask 255.255.255.0 </syntaxhighlight> #* раскомментируйте и отредактируйте строки (или добавьте, если их не было):<syntaxhighlight lang="bash"> auto wlan0 iface wlan0 inet dhcp wpa-ssid {ssid} # вместо {ssid} подставьте имя точки доступа wpa-psk {password} # вместо {password} подставьте пароль </syntaxhighlight> # Чтобы применить изменения, выполните команды <syntaxhighlight lang="bash"> ifdown wlan0 ifup wlan0 </syntaxhighlight> |