Вклад
1 августа 2019
WB SH 3.5: Errata/en
Новая страница: «* disable and reconnect the Wi-Fi module * disconnect and reconnect external USB devices»
−82
Translations:WB SH 3.5: Errata/50/en
Новая страница: «* disable and reconnect the Wi-Fi module * disconnect and reconnect external USB devices»
WB SH 3.5: Errata/en
Новая страница: «If GSM is active and the signal level is poor, it can be observed under certain conditions:»
−81
Translations:WB SH 3.5: Errata/49/en
Новая страница: «If GSM is active and the signal level is poor, it can be observed under certain conditions:»
WB SH 3.5: Errata/en
Новая страница: «'''Symptoms'''»
−9
Translations:WB SH 3.5: Errata/48/en
Новая страница: «'''Symptoms'''»
WB SH 3.5: Errata/en
Новая страница: « PRTCTRL lines (power management for USB devices) are susceptible to interference from the radiation of the GSM antenna. At high output power GSM and is close t…»
−166
Translations:WB SH 3.5: Errata/47/en
Новая страница: « PRTCTRL lines (power management for USB devices) are susceptible to interference from the radiation of the GSM antenna. At high output power GSM and is close t…»
WB SH 3.5: Errata/en
Новая страница: «'''Description'''»
−5
Translations:WB SH 3.5: Errata/46/en
Новая страница: «'''Description'''»
Translations:WB SH 3.5: Errata/45/en
Новая страница: «3.5»
WB SH 3.5: Errata/en
Новая страница: «== 0350005: Leads from GSM on prtctrl line == '''Revision''':»
−23
Translations:WB SH 3.5: Errata/44/en
Новая страница: «== 0350005: Leads from GSM on prtctrl line == '''Revision''':»
WB SH 3.5: Errata/en
Новая страница: «Unsoldering capacitor C11 fixes the problem. See diagram.»
−50
Translations:WB SH 3.5: Errata/43/en
Новая страница: «Unsoldering capacitor C11 fixes the problem. See diagram.»
WB SH 3.5: Errata/en
Новая страница: «'''How to fix'''»
−15
Translations:WB SH 3.5: Errata/42/en
Новая страница: «'''How to fix'''»
WB SH 3.5: Errata/en
Новая страница: «If GSM is active and the signal level is poor, it can be observed under certain conditions: * reboot the Board * disable and reconnect the Wi-Fi module * Etherne…»
−147
Translations:WB SH 3.5: Errata/41/en
Новая страница: «If GSM is active and the signal level is poor, it can be observed under certain conditions: * reboot the Board * disable and reconnect the Wi-Fi module * Etherne…»
WB SH 3.5: Errata/en
Новая страница: «'''Symptoms'''»
−9
Translations:WB SH 3.5: Errata/40/en
Новая страница: «'''Symptoms'''»
WB SH 3.5: Errata/en
Новая страница: «In devices shipped before 20.06.2014 (serial numbers less than 230), the power supply circuit incorrectly limits the output current.»
−82
Translations:WB SH 3.5: Errata/39/en
Новая страница: «In devices shipped before 20.06.2014 (serial numbers less than 230), the power supply circuit incorrectly limits the output current.»
WB SH 3.5: Errata/en
Новая страница: «'''Description'''»
−5
Translations:WB SH 3.5: Errata/38/en
Новая страница: «'''Description'''»
WB SH 3.5: Errata/en
Новая страница: «3.5, S/N before 230»
−6
Translations:WB SH 3.5: Errata/37/en
Новая страница: «3.5, S/N before 230»
WB SH 3.5: Errata/en
Новая страница: «== 0350004: Insufficient peak current (2) == thumb|500px|C11 capacitor placement in WB SH rev. 3.5 (0350004) '''Revision''':»
−59
Translations:WB SH 3.5: Errata/36/en
Новая страница: «== 0350004: Insufficient peak current (2) == thumb|500px|C11 capacitor placement in WB SH rev. 3.5 (0350004) '''Revision''':»
WB SH 3.5: Errata/en
Новая страница: «The wrong value of the crystal oscillator.»
−42
Translations:WB SH 3.5: Errata/35/en
Новая страница: «The wrong value of the crystal oscillator.»
WB SH 3.5: Errata/en
Новая страница: «'''Reason'''»
−8
Translations:WB SH 3.5: Errata/34/en
Новая страница: «'''Reason'''»
WB SH 3.5: Errata/en
Новая страница: «Delivery of fixed Wiren Board Smart Home is possible.»
−29
Translations:WB SH 3.5: Errata/33/en
Новая страница: «Delivery of fixed Wiren Board Smart Home is possible.»
WB SH 3.5: Errata/en
Новая страница: «It is recommended to use adapters on the FT232RL chip and the like.»
−50
Translations:WB SH 3.5: Errata/32/en
Новая страница: «It is recommended to use adapters on the FT232RL chip and the like.»
WB SH 3.5: Errata/en
Новая страница: «For example: (http://ru.aliexpress.com/item/Free-Shipping-USB-to-RS485-485-Converter-Adapter-Support-Win7-XP-Vista-Linux-Mac-OS-WinCE5/1896086704.html , http://ww…»
−5
Translations:WB SH 3.5: Errata/31/en
Новая страница: «For example: (http://ru.aliexpress.com/item/Free-Shipping-USB-to-RS485-485-Converter-Adapter-Support-Win7-XP-Vista-Linux-Mac-OS-WinCE5/1896086704.html , http://ww…»
WB SH 3.5: Errata/en
Новая страница: «Use a USB-RS485 adapter.»
−34
Translations:WB SH 3.5: Errata/30/en
Новая страница: «Use a USB-RS485 adapter.»
WB SH 3.5: Errata/en
Новая страница: «'''Workarounds'''»
−10
Translations:WB SH 3.5: Errata/29/en
Новая страница: «'''Workarounds'''»
WB SH 3.5: Errata/en
Новая страница: «Need to replace the crystal oscillator, and recompile Device Tree/en. Recommended value: 24MHz.»
−77
Translations:WB SH 3.5: Errata/28/en
Новая страница: «Need to replace the crystal oscillator, and recompile Device Tree/en. Recommended value: 24MHz.»
WB SH 3.5: Errata/en
Новая страница: «'''How to fix'''»
−15
Translations:WB SH 3.5: Errata/27/en
Новая страница: «'''How to fix'''»
WB SH 3.5: Errata/en
Новая страница: «The built-in RS-485 ports cannot be set to 250 kBaud. This makes it impossible to work with DMX-512.»
−87
Translations:WB SH 3.5: Errata/26/en
Новая страница: «The built-in RS-485 ports cannot be set to 250 kBaud. This makes it impossible to work with DMX-512.»
WB SH 3.5: Errata/en
Новая страница: «'''Description'''»
−5