Сборка неразъемных трансформаторов WB-CT309
Purpose
The assembly is intended for use in conjunction with WB-MAP meters as a replacement for split transformers. The use of one-piece transformers is often more convenient and reliable when assembling the shield from scratch.
Технические характеристики
Parameter | Value |
---|---|
Rated current | 5 A |
Maximum current | 125 A |
Hole diameter (max. cable diameter) | 9.5 mm |
Transformation ratio | 1:2000 |
Phase angle, 1/1000 of a degree | 120 |
Dimensions (L x W x H) | 74 x 30 x 36 mm |
Масса (с коробкой) |
70 g |
Datasheet for used transformers: Файл:ZMCT123.pdf
Mounting
Step between transformers - 1 DIN module (17.5 mm). It is convenient to install the assembly immediately under the machines. They can also be joined two at a time by turning the right assembly over and crimping the second end of the cable in a different order - this way the step between the transformers will be preserved.! N! It can be attached to the shield panel using self-tapping screws to plastic racks. You can also simply fix it on the cable with ties (put it on the cable itself to limit the stroke).
Переходник с розеткой RJ-12 вставляется в счетчик WB-MAP вместо ответного клеммника и соединяется с трансформаторами соединительным кабелем (есть в комплекте). Кабель изготовляется из витой пары и двух вилок 6P6C (RJ-12), обжатых по прямой схеме: бело-оранжевый, оранжевый, бело-зеленый, зеленый, бело-синий, синий (см. схему 1).
Если вы устанавливаете две трансформаторных сборки рядом и вторую переворачиваете, то один из концов кабеля нужно обжать по другой схеме: оранжевый, бело-оранжевый, зеленый, бело-зеленый, синий, бело-синий (см. схему 2).
Не рекомендуется работа без подключения к счетчику WB-MAP.
Известные неисправности
Известных неисправностей нет.
Ревизии устройства
The batch number can be found on a sticker on the side of the case or on the PCB.
Revision | Batch | Release date | Differences from previous revision |
---|---|---|---|
1.4 | v1.4A, v1.4B - ... | 06.2021 - ... |
|
1.3 | v1.3A - v1.3E | 03.2021 - 11.2021 |
|
Изображения и чертежи устройства
Corel Draw 2018 (шрифт — Ubuntu): Файл:WB-Library.cdr.zip
Visio:
- Устройства Wiren Board: Файл:WB-Visio-Lib.cdr.zip.
- Щиты, автоматы, контакторы и прочее от стороннего разработчика.
Corel Draw PDF: Файл:CT3.cdr.pdf