Translations:Disassembling the controller case/24/en
Версия от 20:25, 17 августа 2022; Matveevrj (обсуждение | вклад)
- Put the controller back cover up.
- Insert a screwdriver between the latch and the foundation. With a smooth twisting motion, release the latch and pull the back cover up. Do the same with all other latches.
- Use a screwdriver to bend back the remaining latches and take off the cover.
- Slightly bend back the side wall of the case where a connector for linking external modules is located, and push the controller out of the case. Don't push to hard, so is not to damage the connector.