Translations:Создание microSD-карты с образом/7/en

• insert the microSD card into the reader
• find out the name of the device corresponding to the map. This is usually /dev/mmcblk0 or /dev/sdX (where X is the letter). This command can help

  dmesg | tail

  Do not confuse the device name! Incorrectly specifying the name of the device, you will lose all data on your computer forever!

• unmount the map partitions that Linux mounted automatically:
  • if the device is called / dev /mmcblk0, the partitions are called/dev /mmcblk0p1,/dev /mmcblk0p2, etc.
  • if the device is called / dev /sdb, the partitions are/dev /sdb1,/dev /sdb2, etc.
• An example of a command:

  umount /dev/mmcblk0p1

• flash the card:

  sudo dd if=sdcard.dd of=/dev/mmcblk0 bs=4M

, where "sdcard.dd" is path to the previously downloaded unzipped image file.