12 063
правки
(Новая страница: «The table below lists the specifications and conditions of use of the WB-MR6F relay module. Each output of the module is protected from arcing when the varistor c…») |
(Новая страница: «=== Inputs=== 420px|thumb|left|Closed input in trigger mode may be unstable The inputs of the modules WB-MR6F displayed on the pressure…») |
||
Строка 21: | Строка 21: | ||
Each output of the module is protected from arcing when the varistor closes/opens. Depending on the Modbus register settings, the status of the inputs can be resumed after a power interruption (see [[#Relay operation mode in case of power failure|Relay operation mode in case of power failure]]). | Each output of the module is protected from arcing when the varistor closes/opens. Depending on the Modbus register settings, the status of the inputs can be resumed after a power interruption (see [[#Relay operation mode in case of power failure|Relay operation mode in case of power failure]]). | ||
=== | === Inputs=== | ||
[[ | [[File:Input_modes.png|420px|thumb|left|Closed input in trigger mode may be unstable]] | ||
The inputs of the modules WB-MR6F displayed on the pressure screwless terminal blocks. Inputs are organized on the principle of dry contact. Buttons or switches are connected between the corresponding inputs and iGND inputs. There is a special input for disconnecting all relays of the module at the same time. | |||
Каждый вход управляет состоянием соответствующего реле. | Каждый вход управляет состоянием соответствующего реле. |
правки