Translations:WBC-4G v.2/4/en
Module Installation
When ordering modules bundled with the Wiren Board controller, we install them in production - you only need to configure the modules in web interface of the controller.
If you bought the modules separately, install them yourself:
- Disassemble the controller case.
- Insert the module, observing the polarity: the protrusion on it must fit into the groove on the controller board.
- Insert the SIM card.
- Put the case back together.
- Screw the external antenna onto the SMA socket.
When mounting in a metallic shield for reliable radio communication, place the antenna outside.