Translations:WB Modbus Devices Firmware Update/68/en
Версия от 07:54, 27 августа 2024; A.Degtyarev (обсуждение | вклад) (Новая страница: «To do this, you will need the utility itself and the firmware file: # Connect the device via the RS-485 bus to the controller or other equipment where the firmware utility is installed. {{Wbincludes:Prepare modbus_client}} # Download the firmware file for your device from the repository. # Upload the firmware file to the controller or other de...»)
To do this, you will need the utility itself and the firmware file:
- Connect the device via the RS-485 bus to the controller or other equipment where the firmware utility is installed.
- Если вы выполняете команды на контроллере:
- Откройте консоль контроллера по SSH.
- Остановите драйвер wb-mqtt-serial или иное ПО, которое опрашивает устройство.
- Download the firmware file for your device from the repository.
- Upload the firmware file to the controller or other device with the firmware utility installed.
- Go to the folder with firmware and execute the command:
- on a Linux-based controller or computer:
wb-mcu-fw-flasher -d /dev/ttyRS485-1 -a 25 -f ./firmware.wbfw
- on a Windows-based computer:
wb-mcu-fw-flasher_1.0.3.exe -d COM1 -a 25 -f firmware.wbfw