Dual channel analog voltage output (0-10V) module(WBE-AO-10V-2)

Материал из Wiren Board
Версия от 19:44, 1 июля 2019; RomanKulibaba (обсуждение | вклад) (Новая страница: «== Compatibility table == {| class="wikitable" !Controller !Revision !MOD1 !MOD2 |- |Wiren Board 5 |5.3 |<nowiki>+</nowiki> |<nowiki>+</nowiki> |- |Wiren Board 5…»)

(разн.) ← Предыдущая | Подтверждённая версия (разн.) | Текущая версия (разн.) | Следующая → (разн.)

Купить в интернет-магазине


Другие языки:

Dual channel module with 0-10 V analog outputs.

Hardware

The module is built on a digital to analog Converter MCP4728 and supports two output channels with a voltage from 0 to 10 V.

Pinout

DAC extension module

Pinout:

Terminal Function
O1 channel 1 output
O2 channel 2 output
O3 GND

Configuration

Configuration is set in the web interface. Section Configs => Hardware Modules Configuration. Next, in Internal slot 1 or in Internal slot 2, select "WBE-AQ-10V-2 Dual channel analog voltage output (0-10V) module" and click Save.


The device is detected immediately, no reboot is required.


Operation

WBE-AO-10V-2 in the web interface

In the web interface, the module channels appear in the Analog Outputs section and are called MOD1_O1 and MOD1_O2 for the module installed in the first connector, MOD2_O1 and MOD2_O2 for the module installed in the second connector. The voltage value (in millivolts) is published in mqtt-topics /devices/wb-dac/controls/.



Compatibility table

Controller Revision MOD1 MOD2
Wiren Board 5 5.3 + +
Wiren Board 5 5.6 + +
Wiren Board 5 5.8 + +