WBE-DO-R6C-1 relay inputs module

Материал из Wiren Board
Это утверждённая версия страницы. Она же — наиболее свежая версия.
Другие языки:
WBE-DO-R6C-1 for Wiren Board 5

The module has one SPDT configuration relay (switch contact).


Max current: 6A for 230V AC or 30V DC. The maximum current is specified for the resistive load.

Relay output contact diagram


Pinout:

Terminal Function
O1 NO
O2 NC
O3 COM


Configuration

Configuration is carried out in the web interface, section Configs => Hardware Modules Configuration. 

In the Internal slot 1 or 2 section (depending on the slot number) select "WBE-DO-R6C-1" and click Save.

Once added, additional inputs appear in Devices next to the controller inputs.

The device is detected immediately, no reboot is required.


MQTT

Slot Channel Topic
MOD1 wb-gpio/MOD1_OUT1 /devices/wb-gpio/controls/MOD1_OUT1
MOD2 wb-gpio/MOD2_OUT1 /devices/wb-gpio/controls/MOD2_OUT1


Technical detail

The relay control signal is on the IRQ contact of the extension module


Compatibility

The module is compatible with Wiren Board 5 controllers of all revisions. MOD1 or MOD2 slots are allowed for inserting the module.