Работа с GPIO/en: различия между версиями

Работа с GPIO/en (просмотреть исходный код)

12 байт добавлено , 5 лет назад

Нет описания правки

12 063

правки

@@ Строка 3: / Строка 3: @@
 GPIO are also used to control the switching transistors for low-voltage load.
-The correspondence between numbers GPIO Linux and their location and function can be found in the table [[WB SH 3.5: Список GPIO| WB SH 3.5: List of GPIO]] or [[WB rev. 2.8: Список GPIO| WB rev. 2.8: List of GPIO]].
+The correspondence between GPIO numbers in Linux and  between their location and function can be found in the table [[WB SH 3.5: Список GPIO| WB SH 3.5: List of GPIO]] or [[WB rev. 2.8: Список GPIO| WB rev. 2.8: List of GPIO]].
 In Wiren Board rev. 2.8 8 GPIO on a special connector connected via [[Special:MyLanguage/MCP23S08|MCP23S08]] and temporarily do not work with standard Linux API. How to work with them there on the page [[Special:MyLanguage/MCP23S08|MCP23S08]].