CODESYS/en: различия между версиями

To use CODESYS with a Wiren Board controller, you need to buy the [https://store.codesys.com/en/codesys-control-for-linux-arm-sl-bundle.html CODESYS Control for Linux ARM SL] license. There is a demo version with a time limit.

Install the development environment and the necessary packages:

<gallery mode="packed" heights="100px" caption="Installing packages to work with the Wiren Board controller">

Image: CODESYS Install 1.png | Starting the installation of packages

Image: CODESYS Install 2.png | Package selection

Image: CODESYS Install 3.png | Installation Confirmation

Now let's install the executive system on the Wiren Board controller:

# Go to menu '''Tools''' → '''Update Linux ARM'''.

# In the Linux ARM panel that opens, enter:

#* Username - root,

#* Password - ssh password,

#* IP Address - IP address of the controller.

# Click the '''Install''' button.

The development environment is set up, the executive system is installed on the controller, you can proceed to development.

<gallery mode="packed" heights="130px" caption="Install the runtime on the Wiren Board controller">

Image: CODESYS Update Linux ARM 1.png | Starting the installation

Image: CODESYS Update Linux ARM 2.png | Connection options

== Creating a project ==

Create a project:

# Select '''File''' → '''New Project''' from the menu.

# In the project settings, specify:

#* Device - CODESYS Control for Linux ARM SL.

#* PLC_PRG in is the preferred development language.

You can communicate with devices connected to the controller using the [[MQTT]] protocol via the built-in [[Modbus_RTU/TCP_Slave | gateway Modbus RTU/TCP]] or directly via [[Modbus | Modbus RTU]].

<gallery mode="packed" heights="130px" caption="Creating a project">

Image: CODESYS Project Settings.png | Create a project

Image: CODESYS Update Linux ARM 3.png | Checking work

== Useful links ==

* [https://www.codesys.com/ CODESYS website]