История
21 сентября 2022
20 сентября 2022
Нет описания правки
+24
Нет описания правки
+4
Нет описания правки
−17
Новая страница: «When the channel is in input mode, the Ax_OUT (D1_OUT) switch must be turned off.»
−61
Новая страница: «<gallery mode="packed" heights="100px" caption="Универсальные входы-выходы"> Image: WB6_AI_DI.PNG| Wiren Board 6 Image: WB7_AI_DI.PNG| Wiren Board 7 Image: WB6.Ax.png| Schematic of the Ax Image: WB7.D1.png| Schematic of the D1 in Wiren Board 7 </gallery>»
+12
Новая страница: «As discrete inputs, you can use the universal inputs/outputs Ax (D1), which can operate as a discrete input in the voltage range up to 40 V. Signals from discrete inputs are displayed in the web interface of the controller or transmitted via MQTT.»
−220
Новая страница: «== Discrete inputs at the Wiren Board controller ==»
−24
Новая страница: ««Dry» are usually called contacts that are not connected to any other circuits of the external system: relay contacts, reed switches, switches. An “open collector” output, for example, cannot be called a dry contact, since it is not galvanically isolated from an external device.»
−200
Нет описания правки
+612
Нет описания правки
−1
Новая страница: «{{DISPLAYTITLE: Digital input}} == General description == '''DI''' (''digital input'') — input with two states. Used to connect reed switches, water and electricity meters, buttons.»
−209
Обновление для соответствия новой версии исходной страницы.
+1391
16 мая 2019
Нет описания правки
+3
Нет описания правки
Новая страница: «The voltage threshold for guaranteed operation (transition to the voltage supplied state) is 3.3V. the maximum possible voltage can be found here: Wiren Board 4…»
−160
Новая страница: «DI is used to connect reed switches, water and electricity meters, buttons. To do this, one contact of the button/reed switch/meter is connected to a voltage sour…»
−197
Новая страница: «'''DI''' (''digital input'') - controller input has two states: either the voltage is applied or not applied.»
−114
Новая страница: «DI»
+1149