translator, wb_editors
4251
правка
Disassembling the controller case/en: различия между версиями
Disassembling the controller case/en (просмотреть исходный код)
Версия 20:42, 17 августа 2022
, 1 год назадНет описания правки
Matveevrj (обсуждение | вклад) |
Matveevrj (обсуждение | вклад) |
||
| Строка 25: | Строка 25: | ||
#Place the controller board in the case. | #Place the controller board in the case. | ||
#Make sure the '''On/Off''' switch on the front panel is in its aperture. Do not apply excessive force to avoid damaging the switch. | #Make sure the '''On/Off''' switch on the front panel is in its aperture. Do not apply excessive force to avoid damaging the switch. | ||
#Slightly bend back the side wall of the case where | #Slightly bend back the side wall of the case where the connector for linking external modules is located. Gently press the circuit board into the case so that the connector fits into the aperture in the side of the case. | ||
#Install the back cover. | #Install the back cover. The cover latches should close whith a clicking sound. | ||
<gallery mode="packed" heights="150px"> | <gallery mode="packed" heights="150px"> | ||