Hardware Overview rev. 2.8-rus: различия между версиями

Hardware Overview rev. 2.8-rus (просмотреть исходный код)

Версия 22:02, 2 октября 2013

77 байт добавлено ,  10 лет назад
→‎Terminal blocks
Строка 24: Строка 24:




=== Terminal blocks ===
=== TКлеммники ===


{| border="1"
{| border="1"
| location || function || GPIO (if applicable) || olinuxino pin || comments
| клеммник || функция|| GPIO (если есть) || вывод olinuxino || комментарии
|-
|-
| Terminal block 2 || FET/ADC || 32 || 3 @ CON1 || GPIO high to open FET; ADC channel 3
| Клеммник 2 || FET/ADC || 32 || 3 @ CON1 || GPIO high to open FET; ADC channel 3
|-
|-




| Terminal block 3 || FET/ADC || 33 || 4 @ CON1 || GPIO high to open FET; ADC channel 0
| Клеммник 3 || FET/ADC || 33 || 4 @ CON1 || GPIO high to open FET; ADC channel 0
|-
|-


| Terminal block 4 || FET/ADC || 34 || 5 @ CON1 || GPIO high to open FET; ADC channel 1
| Клеммник 4 || FET/ADC || 34 || 5 @ CON1 || GPIO high to open FET; ADC channel 1
|-
|-
| Terminal block 5 || FET/ADC || 35 || 6 @ CON1 || GPIO high to open FET; ADC channel 2
| Клеммник 5 || FET/ADC || 35 || 6 @ CON1 || GPIO high to open FET; ADC channel 2
|-
|-
| Terminal block 6 || FET/ADC || 39 || 10 @ CON1 || GPIO high to open FET; ADC channel 4
| Клеммник 6 || FET/ADC || 39 || 10 @ CON1 || GPIO high to open FET; ADC channel 4
|-
|-
| Terminal block 7 || FET/ADC || 1 || 12 @ CON1 || GPIO high to open FET; ADC channel 6
| Клеммник 7 || FET/ADC || 1 || 12 @ CON1 || GPIO high to open FET; ADC channel 6
|-
|-
| Terminal block 8 || GND || || ||
| Клеммник 8 || GND || || ||
|-
|-


| Terminal block 9 || GPIO/ADC || 2 || 13 @ CON1 || ADC channel 7
| Клеммник 9 || GPIO/ADC || 2 || 13 @ CON1 || ADC channel 7
|-
|-
| Terminal block 10 || GPIO || 3 || 14 @ CON1 ||
| Клеммник 10 || GPIO || 3 || 14 @ CON1 ||
|-
|-
| Terminal block 11 || GPIO || 4 || 15 @ CON1 ||
| Клеммник 11 || GPIO || 4 || 15 @ CON1 ||
|-
|-
| Terminal block 12 || RS-485 A || || || UART1 from sc16is752, if RS-485 present
| Клеммник 12 || RS-485 A || || || UART1 from sc16is752, if RS-485 present
|-
|-
| Terminal block 13 || RS-485 B || || || UART1 from sc16is752, if RS-485 present
| Клеммник 13 || RS-485 B || || || UART1 from sc16is752, if RS-485 present
|-
|-
| Terminal block 14 || GND || || ||
| Клеммник 14 || GND || || ||
|-
|-
| Terminal block 15 || +3.3v || || ||  
| Клеммник 15 || +3.3v || || ||  
|-
|-
| Terminal block 16 || +5.0v || || ||  
| Клеммник 16 || +5.0v || || ||  
|-
|-
| Terminal block 17 || Vin || || || input voltage; ADC channel 5
| Клеммник 17 || Vin || || || input voltage; ADC channel 5
|-
|-
| Terminal block 18 || GND || || ||
| Клеммник 18 || GND || || ||
|-
|-
| Terminal block 19 || Power FET || 60 || 28 @ CON2 || with PWM
| Клеммник 19 || Power FET || 60 || 28 @ CON2 || with PWM
|-
|-
|}
|}


=== Externaly routed GPIOs ===
=== Externaly routed GPIOs ===
Источник — https://wirenboard.com/wiki/Служебная:Сравнение_версий/54