История
8 апреля 2022
27 мая 2020
19 июля 2019
Новая страница: «* GroupValueRead * GroupValueResponse * GroupValueWrite * IndividualAddrWrite * IndividualAddrRequest * IndividualAddrResponse * AdcRead * AdcResponse * MemoryRea…»
−38
Новая страница: «Supported message types(APCI):»
−33
18 июля 2019
Новая страница: «* SrcAddr, DstAddr - Addresses of KNX devices in the format "n/n/n" or "n/n". * APCI - message Type: string or 4-bit number. * Data - a Message in the form of byt…»
−130
Новая страница: «All messages from the KNX bus will be delivered to the MQTT topic /devices/knx/controls/data in the form:»
−20
Новая страница: «To send an individual telegram to KNX, you must send:»
−74
Новая страница: «== Format MQTT messages == To send a group telegram to KNX, you must send the prepared message to the MQTT topic:»
−114
Новая страница: «Information on setting up knxd can be found in the configuration file /etc/knxd.conf - https://github.com/knxd/knxd/blob/master/systemd/knxd.conf and in<pre>$ knx…»
−48
Новая страница: «= Setting= At the moment, wb-mqtt-knx does not have a configuration file.»
−54
Новая страница: «= Installation= wb-mqtt-knx in Wiren Board controllers is installed via apt-get:<pre>$ apt-get install wb-mqtt-knx</pre>»
−18
Новая страница: «wb-mqtt-knx sends KNX telegrams from the specialized MQTT topic to the KNX network and back. To work with KNX, KNXD is used- https://github.com/knxd/knxd»
−89
Новая страница: «Package: wb-mqtt-knx Source code:https://github.com/contactless/wb-mqtt-knx»
−16
Новая страница: «Devices using the KNX Protocol.»
−37
Новая страница: «MQTT KNX Bridge»
+3256