RS-485

Материал из Wiren Board
Это утверждённая версия страницы. Она же — наиболее свежая версия.
Версия для печати больше не поддерживается и может содержать ошибки обработки. Обновите закладки браузера и используйте вместо этого функцию печати браузера по умолчанию.
Другие языки:

RS-485 is two-wire bus communication standard.

Up to 256 devices can be connected to the bus. Transmission speed is up to 115200 bit/s.Line length is up to 1200 meters.

You can connect the following devices to the Wiren Board controller Via the RS-485 bus:


Basics of the RS-485 interface

See article Basics of RS-485 interface operation.

The Wiren Board devices use the Modbus Protocol on top of the RS-485. Modbus protocol.


How to lay the bus correctly

See article RS-485:Physical connection.


Adding a device to the web interface

Configuration takes place via the Configs веб-интерфейса

After connecting the RS-485 device to the controller, you need to configure it to appear in the web interface. See the instructions in article RS-485:Настройка через веб-интерфейс.


Working with RS-485 port of the controller using its own software