12 063
правки
Translations:ADC/2/en: различия между версиями
Нет описания правки
(Новая страница: «#Select the terminal to which your source can be connected based on the maximum allowable voltage (see table below). #Most ADC terminals have two functions: ADC a…») |
|||
| Строка 1: | Строка 1: | ||
#Select the terminal to which your source can be connected based on the maximum allowable voltage (see table below). | #Select the terminal to which your source can be connected based on the maximum allowable voltage (see table below). | ||
#Most ADC terminals have two functions: ADC and low-voltage load control. Before measuring the voltage on the ADC, turn off the appropriate low-voltage load control output. For example, if you are connecting to terminal A1, turn off A1_OUT in the web interface (the Relays & FETs section). | #Most ADC terminals have two functions: ADC and low-voltage load control. Before measuring the voltage on the ADC, turn off the appropriate low-voltage load control output. For example, if you are connecting to terminal A1, turn off A1_OUT in the web interface (the Relays & FETs section). | ||
#:For details, see [[ | #:For details, see [[Мультиплексирование портов/en|Multiplexing ports]] | ||
#Connect your source to the terminal. The voltage value will immediately appear in the [[Wiren Board 4:Веб-интерфейс | веб-интерфейсе]] in the ADCs device. The value is also translated to the MQTT message system[[MQTT|MQTT]]. | #Connect your source to the terminal. The voltage value will immediately appear in the [[Wiren Board 4:Веб-интерфейс | веб-интерфейсе]] in the ADCs device. The value is also translated to the MQTT message system[[MQTT|MQTT]]. | ||