Translations:Sensors Modbus Management/19/en
Версия от 22:39, 29 марта 2020; EvgenyBoger (обсуждение | вклад)
Starting address | Quantity | Purpose | In modifications | From firmware version |
---|---|---|---|---|
0 | 1 | Enable buzzer (buzzer) | WB-MSW v.3, WB-MSW2 | |
1 | 1 | Forced calibration of the built-in CO2 sensor. Turn on after 20 minutes of operation at a CO2 level of 400 ppm | WB-MSW v.3, WB-MSW2 | |
2 | 1 | Turn on the heating (heater) in the temperature and humidity sensor chip HDC1080 | WB-MS, WB-MSW v.3, WB-MSW2 | 3.2.0 |
3 | 1 | Power on/off of the CO2 sensor | WB-MSW V. 3 | 4.1.0 |
10 | 1 | Green led on | WB-MSW v.3 | |
11 | 1 | Enable red led | WB-MSW v.3 |