Translations:Sensors Modbus Management/7/en

Register/ address	Type	Read/ write	default or error Value	Format	Purpose	Supported in					From version insertions
						WB-MS (model code)	WB-MS v2 (model code)	WB-MSW	WB-MSW2	WB-MSW V. 3
0	input	R	0x7FFF	°C × 10 (signed)	Temperature with built-in sensor	T	-	-	+	+
1	input	R	%RH × 10 (signed)	relative humidity with built-in sensor	H	-	+	+	+
2	input	R	-	LC	"(register is not used in WB-MSW sensors, registers 9 and 10 instead)" Illumination from built-in sensor	L	Lux	-	-	-
3	input	R	-	dB × 100	Noise level multiplied by 100	S	-	+	S	S
4	input	R	0x7FFF	°C × 100 (signed)	Temperature with built-in sensor	+	+	-	-	+	4.2
5	input	R	-	%RH × 100 (signed)	Relative humidity with built-in sensor	+	+	-	-	+	4.2
6	input	R	0x7FFF	°C × 16 (signed)	Temperature from external sensor	D	+	-	-	-
7	input	R	0x7FFF	°C × 16 (signed)	Temperature from external sensor	D	+	-	-	-
8	input	R	0xFFFF	PPM	CO2 concentration	-	-	After	C
9-10	input	R		LC	The illumination, multiplied by 100 (9 - high-order, 10 — LSB luminance values)	-	-	+	L
11	input	R	0xFFFF	PPM	Air quality	-	VOC	-	-	+
88	holding	RW	0	ppm (400-1500)	Service register, doesn't present in most devices. Manual calibration of CO2 sensor. For calibration, write down here the current CO2 concentration measured by another instrument	-	-	-	C	C	3.12
89	holding	RW	0xFF	days'	Service register, doesn't present in most devices. Cycle time for co sensor self-calibration algorithm (ABC)	-	-	-	C	C	3.12
90	holding	RW	20 (200 ms)	× 10 ms	light averaging Time	L, B	-	-	-	-
91	holding	RW	20 (200 ms)	× 10 ms	Noise averaging time	S	-	+	S	S
95	holding	RW	1	1 or 0	CO2 sensor (ABC) auto-calibration to atmospheric CO2	-	-	-	After	C
96	holding	R	2000 / 5000	ppm	(available from firmware version 3.5.0) CO2 concentration measurement Range. Valid values: 2000, 5000, 10000.	-	-	-	C	C	3.5.0