Translations:WB-MR3xV and WB-MR6xV Modbus Relay Modules/16/en

Parameter	Value
colspan= " 2 " / Power
Supply voltage	9-24V DC
Power consumption	Idle mode (with all relays off) — 0.5 W With all relays on-WB-MR3xV: 1.5 W; WB-MR6xV: 3W Peak value-up to 8W for 20ms
"'Outputs"'
Output type	Mechanical relay contacts
Output configuration	3 or 6 outputs connected to relay contacts
Configuration of contacts of each output	Two-position, normally open in modification "'S"' (C and NO) Two-position with switching in modifications "'I"' and "'R"' (NC C NO)
Maximum switching voltage, AC	250 V
Maximum switching voltage, DC	30 V
Maximum switching current per channel	see the table in # relay Parameters
Contact resistance	< 100 milliohms
Voltage isolation between the controller and the output	1500 V (RMS)
Term life:	see table under # relay Parameters
colspan= " 2 " / Inputs
Number of inputs (Inputs 1— 4)	4 (3+1) for WB-MR3xV 7 (6+1) for WB-MR6xV
Input type (WB-MR3LV and WB-MR6LV)	"Dry contact", group isolation. The input voltage is ~4.5 V. Input short-circuit current ~2mA.