12 063
правки
Translations:Wiren Board 5: Восстановление прошивки/4/en: различия между версиями
Translations:Wiren Board 5: Восстановление прошивки/4/en (просмотреть исходный код)
Версия 14:44, 11 июня 2019
, 4 года назадНет описания правки
| Строка 30: | Строка 30: | ||
#*''/X/XX/XXXXX_emmc_wb5.img'' - replace with the path to the pre-extracted firmware file, | #*''/X/XX/XXXXX_emmc_wb5.img'' - replace with the path to the pre-extracted firmware file, | ||
#*''/dev/sdX'' - replace with the name of the partition under which the drive is defined in the system, | #*''/dev/sdX'' - replace with the name of the partition under which the drive is defined in the system, | ||
#:and run the command <syntaxhighlight lang="bash">$ sudo dd if=/X/XX/XXXXX_emmc_wb5.img of=/dev/sdX bs=1M conv=fdatasync && sync</syntaxhighlight> #After recording is complete, disconnect the controller from the USB, turn off the controller, and then turn it back on. | #:and run the command <syntaxhighlight lang="bash">$ sudo dd if=/X/XX/XXXXX_emmc_wb5.img of=/dev/sdX bs=1M conv=fdatasync && sync</syntaxhighlight> | ||
#After recording is complete, disconnect the controller from the USB, turn off the controller, and then turn it back on. | |||