12 063
правки
WB-MAI11 Modbus Analog Inputs/en: различия между версиями
WB-MAI11 Modbus Analog Inputs/en (просмотреть исходный код)
Версия 15:21, 19 июля 2019
, 4 года назадНовая страница: «If the channel is set to automatic gain factor, the channel polling rate may be reduced by requiring multiple measurements to match the gain factor.»
(Новая страница: «== Description of Modbus registers == All modbus registers of the device are divided into 3 groups: * Device settings * The setting of the measurement channels *…») |
(Новая страница: «If the channel is set to automatic gain factor, the channel polling rate may be reduced by requiring multiple measurements to match the gain factor.») |
||
| Строка 499: | Строка 499: | ||
Since each input supports and differential (scheme in Fig. 1,4,7) and normal mode (scheme in Fig. 2,3,5,6) operation, the sensor type is set for inxp and INxN inputs separately in the respective registers 0x'''X'''400 и 0x'''X'''401, where '''X''' is the input number from 1 to 11 in hexadecimal (0x1 to 0xB). | Since each input supports and differential (scheme in Fig. 1,4,7) and normal mode (scheme in Fig. 2,3,5,6) operation, the sensor type is set for inxp and INxN inputs separately in the respective registers 0x'''X'''400 и 0x'''X'''401, where '''X''' is the input number from 1 to 11 in hexadecimal (0x1 to 0xB). | ||
If the channel is set to automatic gain factor, the channel polling rate may be reduced by requiring multiple measurements to match the gain factor. | |||
Для нормального режима работы канала доступны только коэффициенты усиления 1, 2 и 4. | Для нормального режима работы канала доступны только коэффициенты усиления 1, 2 и 4. | ||