WB-MR: Errata/en: различия между версиями

Новая страница: «Fixed in 1.11.1 When the device is turned on, the state of its inputs falls into the discrete input registers In this case, the output does not react and either d…»
(Новая страница: «====Scheduled fix===»)
(Новая страница: «Fixed in 1.11.1 When the device is turned on, the state of its inputs falls into the discrete input registers In this case, the output does not react and either d…»)
 
Строка 12: Строка 12:
====Scheduled fix===
====Scheduled fix===


Исправлено в 1.11.1
Fixed in 1.11.1
При включении устройства состояние его входов попадает в регистры дискретных входов
When the device is turned on, the state of its inputs falls into the discrete input registers
При этом выход никак не реагирует и либо отключен, либо загружает состояние перед выключением из памяти если эта функция включена в регистре 6. Маппинг матрица не обрабатывает вход.
In this case, the output does not react and either disabled or loads the state before switching off from memory if this function is enabled in register 6. The mapping matrix does not process the input.
Только если настроен режим работы входа - 5 (датчки протечки с повторением через 20 минут) происходит обработка входа как события и реакция на него через маппинг матрицу.
Only if the input mode - 5 is set (leakage sensors with repetition after 20 minutes), the input is processed as an event and the response to it through the mapping matrix.
Все реакции выполняются после дальнейших изменений входов.
All reactions are performed after further input changes.
12 063

правки