WB-MRWL3 Modbus Relay Modules/en: различия между версиями

WB-MRWL3 Modbus Relay Modules/en (просмотреть исходный код)

Версия 19:38, 18 июля 2019

1 байт убрано , 4 года назад

Нет описания правки

RomanKulibaba

12 063

правки

Версия 19:29, 18 июля 2019 (просмотреть исходный код) RomanKulibaba (обсуждение \| вклад) (Новая страница: «The flowing current is small when the button or switch is closed, so the button or switch can be any type. Despite the built-in protection against rattle, choose…») ← Предыдущая правка		Версия 19:38, 18 июля 2019 (просмотреть исходный код) RomanKulibaba (обсуждение \| вклад) Следующая правка →
Строка 69:		Строка 69:


	The inputs have two modes of operation: trigger mode (for control with buttons) and repeat mode (for control with switches). In the trigger mode, to change the state of the relay, it is enough to close and open the input once. The change of state occurs on the rising edge (when the circuit ~~is closed~~). In the repeat mode, the relay state is determined by the input state: the input is closed — the relay is on, open — off. Details about the mode switching written in [[ Modbus Management Of Relay Modules/en\|Modbus Management Of Relay Modules]].		The inputs have two modes of operation: trigger mode (for control with buttons) and repeat mode (for control with switches). In the trigger mode, to change the state of the relay, it is enough to close and open the input once. The change of state occurs on the rising edge (that is, when the circuit). In the repeat mode, the relay state is determined by the input state: the input is closed — the relay is on, open — off. Details about the mode switching written in [[ Modbus Management Of Relay Modules/en\|Modbus Management Of Relay Modules]].