12 063
правки
WB-UPS Backup power supply for DIN rails/en: различия между версиями
WB-UPS Backup power supply for DIN rails/en (просмотреть исходный код)
Версия 17:53, 17 июля 2019
, 4 года назадНовая страница: «== Installation== Note the small allowable temperature range for the module to operate. Operation of the module is possible only in the range of -20°C to 60°C,…»
(Новая страница: «=== Output Status === In the presence of the input voltage - the Status output is pulled to the ground resistance of 470 Ohms. When working on batteries - the ou…») |
(Новая страница: «== Installation== Note the small allowable temperature range for the module to operate. Operation of the module is possible only in the range of -20°C to 60°C,…») |
||
| Строка 89: | Строка 89: | ||
You can connect both the digital input of the controller and analog, with this voltage on the batteries can be judged on the remaining charge and operating time. | You can connect both the digital input of the controller and analog, with this voltage on the batteries can be judged on the remaining charge and operating time. | ||
== | == Installation== | ||
Note the small allowable temperature range for the module to operate. | |||
Operation of the module is possible only in the range of -20°C to 60°C, and the battery is charged at a temperature of 0°C to 45°C. | |||
Therefore, use with caution in unheated areas. Do not allow the module to overheat - do not install in the shield close to highly heated components - for example, to contactors. | |||
To improve cooling, install from the edge of the shield, insert the lock on the DIN rail between it and the adjacent module. | |||