Wbincludes:Configuration MOD/en: различия между версиями

Новая страница: «To remove a module, select the type '''None'''.»
(Новая страница: «After the module is physically connected, it must be added to the controller configuration: #In the web interface, go to the section '''Settings''' → '''Configs''' → '''Hardware Modules Configuration''', select the '''Internal slot''' where the module is installed extensions. #In the '''Module type''' drop-down list, select the name of the installed module. #Press the '''Save''' button. The controller will enable the ports required for the module to work.»)
(Новая страница: «To remove a module, select the type '''None'''.»)
Строка 11: Строка 11:
#Press the '''Save''' button. The controller will enable the ports required for the module to work.  
#Press the '''Save''' button. The controller will enable the ports required for the module to work.  


<div lang="ru" dir="ltr" class="mw-content-ltr">
To remove a module, select the type '''None'''.
Для удаления модуля выберите тип '''Не установлен'''.
</div>