Wbincludes:Configuration WBC/en: различия между версиями

Wbincludes:Configuration WBC/en (просмотреть исходный код)

Нет изменений в размере , 11 месяцев назад

Нет описания правки

3690

правок

@@ Строка 1: / Строка 1: @@
 <noinclude></noinclude>
-After physically connecting the modem, it must be added to the controller configuration:
+After physically connecting the modem, it should be added to the controller configuration:
- # In the web interface, go to the '''Settings''' → '''Configs''' → '''Hardware Modules Configuration''' section, select the '''Modem slot'''.
- # In the drop-down list, select the type of the installed module for '''Module type'''.
- # Click the '''Save''' button. The controller will enable the ports required for the modem to work.
-To remove the module, select the '''None''' type.
+# In the web interface, go to the '''Settings''' → '''Configs''' → '''Hardware Modules Configuration''' section, select the '''Modem slot'''.
+# In the '''Module type''' drop-down list, select the type of the installed module.
+# Click the '''Save''' button. The controller will enable the ports required for the modem to work.
-After configuration, turn on the modem using the command <code>wb-gsm on</code> and configure the connection to the mobile operator.</noinclude>
+To remove the module, select the type '''None'''.
+After configuring, turn on the modem using the command <code>wb-gsm on</code> and set up the connection to the mobile operator.<noinclude></noinclude>