Wiren Board 5:Аппаратная часть/en: различия между версиями

Новая страница: «Open collector outputs on Ax channels are shown as Ax_OUT in software. Channel address is "wb-gpio/Ax_OUT".»
(Обновление для соответствия новой версии исходной страницы.)
(Новая страница: «Open collector outputs on Ax channels are shown as Ax_OUT in software. Channel address is "wb-gpio/Ax_OUT".»)
Строка 26: Строка 26:


{|  border="1" width="700" class="wikitable" style="text-align:center"
{|  border="1" width="700" class="wikitable" style="text-align:center"
!colspan="2" | '''Wireless Interfaces'''  
!colspan="2" | '''Беспроводные интерфейсы'''  
|-
|-
| [[Special:MyLanguage/Wi-Fi|Wi-Fi]] || 802.11 b/g/n 2.4 GHz
| [[Special:MyLanguage/Wi-Fi|Wi-Fi]] || 802.11 b/g/n 2.4 ГГц
|-
|-
|| [[Special:MyLanguage/GSM/GPRS|GSM/GPRS]] || 850/900/1800/1900 MHz. GPRS class 12. 85.6 kbps (downlink).  
|| [[Special:MyLanguage/GSM/GPRS|GSM/GPRS]] || 850/900/1800/1900 МГц. GPRS class 12. 85.6 kbps (downlink).  
microSIM card socket.
SIM-карта формата microSIM
|-
|-
|| Bluetooth ||4.0, Bluetooth Low Energy
|| Bluetooth ||4.0, Bluetooth Low Energy
|-
|-
|| ISM Radio || RFM69H module.  
|| Пакетное радио 433 МГц || модуль RFM69H. Для связи с устройствами [[Special:MyLanguage/Поддерживаемые устройства |Noolite]], датчиками [[Special:MyLanguage/Поддерживаемые устройства |Oregon]]
To communicate with [[Special:MyLanguage/Поддерживаемые устройства |Noolite]] devices, [[Special:MyLanguage/Поддерживаемые устройства |Oregon]] sensors
|-
|-
|| [[Special:MyLanguage/Z-Wave|Z-wave]] ||  ''(optional)''
|| [[Special:MyLanguage/Z-Wave|Z-Wave]] ||  ''(опция)''
|-
|-
|| [[Special:MyLanguage/Consumer IR|IR remote]] ||  ''socket for external IR transceiver''
|| [[Special:MyLanguage/Consumer IR|ИК-порт]] ||  ''разъём для подключения внешнего приемопередатчика''
|-
|-
|}
|}
Строка 197: Строка 196:
Such outputs are called “open collector” outputs.
Such outputs are called “open collector” outputs.


Выходы "открытый коллектор" на каналах Ax отображаются в ПО как Ax_OUT. Адрес канала: "wb-gpio/Ax_OUT".
Open collector outputs on Ax channels are shown as Ax_OUT in software. Channel address is "wb-gpio/Ax_OUT".


Input stage of Ax channel consists of an analogue-to-digital converter ADCx and an input resistor Rx (100kOhm).  
Input stage of Ax channel consists of an analogue-to-digital converter ADCx and an input resistor Rx (100kOhm).  
Строка 207: Строка 206:
If the channel terminal is left floating, the input voltage measured by ADCs is pulled down to zero by the Rx resistance.
If the channel terminal is left floating, the input voltage measured by ADCs is pulled down to zero by the Rx resistance.


Ax channels also work as discrete inputs. The logical high state is 3V or higher, the logical low is 1.5V or lower.
Так же для каналов Аx есть функция бинарного входа DI - напряжение на клемме больше 3В контроллер воспринимает как логическую единицу (срабатывание входа), меньше 1,5В - как логический ноль. Бинарные входы на каналах Ax отображаются в ПО как Ax_IN. Адрес канала бинарного входа: "wb-gpio/Ax_IN".


== R1 and R2 Resistive Inputs==
== R1 and R2 Resistive Inputs==