Wiren Board 5: Модуль расширения GPS/Glonass/en: различия между версиями

Новая страница: «When reassembling the case, make sure that the connecting cable from the module to the SMA socket does not get caught between the indicator and the plastic transp…»
(Новая страница: «Fix module SMA-socket in the drilled hole in the case with nuts and connect the external antenna.»)
(Новая страница: «When reassembling the case, make sure that the connecting cable from the module to the SMA socket does not get caught between the indicator and the plastic transp…»)
Строка 61: Строка 61:
Fix module SMA-socket in the drilled hole  in the case with nuts and connect the external antenna.
Fix module SMA-socket in the drilled hole  in the case with nuts and connect the external antenna.


При обратной сборке корпуса следите, чтобы соединительный кабель, ведущий от модуля к SMA-гнезду не попал между индикатором и пластиковым прозрачным световодом на верхней крышке Wiren Board.
When reassembling the case, make sure that the connecting cable from the module to the SMA socket does not get caught between the indicator and the plastic transparent light guide on the top cover of the Wiren Board controller.


[[Получение_точного_времени_через_GPS/Glonass| Настройка NTPD с NMEA и PPS]]
[[Получение_точного_времени_через_GPS/Glonass| Настройка NTPD с NMEA и PPS]]
12 063

правки