Wiren Board 6/en: различия между версиями

Новая страница: «'''In versions starting from WB6.4''' detachable screw terminals "series 15EDG" with a pitch of 3.5 mm were applied as interface terminals. When screwing, do not…»
(Новая страница: «In the 6.3 revision of Wiren Board controller terminals of "type 250" applied as front-end terminals. These are self-locking clips. When the cleaned single wire i…»)
(Новая страница: «'''In versions starting from WB6.4''' detachable screw terminals "series 15EDG" with a pitch of 3.5 mm were applied as interface terminals. When screwing, do not…»)
Строка 201: Строка 201:
To remove the wire, you need to press the spring by pressing the clip button, and pull out the wire.
To remove the wire, you need to press the spring by pressing the clip button, and pull out the wire.


'''В версиях начиная с WB6.4''' в качестве интерфейсных клемм применены разъемные винтовые клеммы "серии 15EDG" с шагом 3,5мм. При завинчивании не прикладывайте больших усилий!
'''In versions starting from WB6.4''' detachable screw terminals "series 15EDG" with a pitch of 3.5 mm were applied as interface terminals. When screwing, do not make a lot of effort!


== Другие интерфейсы ==
== Другие интерфейсы ==
12 063

правки