WBE2-I-1-WIRE 1-Wire Extension Module/en: различия между версиями

Новая страница: «Work features of the applied chip DS2484 and protection circuits are the causes. The protection circuit limits the signal fronts when the DS2484 active pullup is…»
(Новая страница: «====Reasons and detailed description====»)
(Новая страница: «Work features of the applied chip DS2484 and protection circuits are the causes. The protection circuit limits the signal fronts when the DS2484 active pullup is…»)
Строка 50: Строка 50:
====Reasons and detailed description====
====Reasons and detailed description====


Особенности работы применённой микросхемы DS2484 и схемы защиты. Схема защиты ограничивает фронты сигналов при работе активной подтяжки DS2484. Мастер шины DS2484 ошибочно включает активную подтяжку на длинной линии в момент передачи данных (active low) датчиками.  
Work features of the applied chip DS2484 and protection circuits are the causes. The protection circuit limits the signal fronts when the DS2484 active pullup is active. The DS2484 bus master mistakenly enables an active pullup on a long line at the time of data transfer (active low) by the sensors.  
Микросхема также имеет время маленькое время сэмплирования, из-за чего её работа более чувствительна к крутизне фронтов, и, следовательно, к длине линии.
The chip also has a small sampling time, which makes its operation more sensitive to the steepness of the fronts, and therefore to the length of the line.


====Пути обхода====
====Пути обхода====
12 063

правки