translator, wb_editors
4268
правок
Wiren Board 6.7: Peripherals/en: различия между версиями
Wiren Board 6.7: Peripherals/en (просмотреть исходный код)
Версия 21:29, 28 сентября 2022
, 1 год назадНовая страница: «{| class="wikitable" | "'Port Name in Linux'" | 'Alternate Port Name on Linux ' | "'Connector on controller'" | "'Note'" |- |/dev/ttymxc0 |/dev/ttyCONSOLE | Controller debug-uart (micro-usb) | Default Settings: 115200-8-N-1 |- |/dev/ttymxc1 |/dev/ttyRS485-1 | Signed "RS-485," terminal blocks A and B | Uninsulated port, terminator installed |- |/dev/ttymxc3 |/dev/ttyRS485-2 | Signed "RS-485," terminal blocks A/L and B/H (this port can be used as CAN) | Uninsu...»
Matveevrj (обсуждение | вклад) (Новая страница: «== UART implementation ==») |
Matveevrj (обсуждение | вклад) (Новая страница: «{| class="wikitable" | "'Port Name in Linux'" | 'Alternate Port Name on Linux ' | "'Connector on controller'" | "'Note'" |- |/dev/ttymxc0 |/dev/ttyCONSOLE | Controller debug-uart (micro-usb) | Default Settings: 115200-8-N-1 |- |/dev/ttymxc1 |/dev/ttyRS485-1 | Signed "RS-485," terminal blocks A and B | Uninsulated port, terminator installed |- |/dev/ttymxc3 |/dev/ttyRS485-2 | Signed "RS-485," terminal blocks A/L and B/H (this port can be used as CAN) | Uninsu...») |
||
| Строка 91: | Строка 91: | ||
== UART implementation == | == UART implementation == | ||
{| class="wikitable" | {| class="wikitable" | ||
|' | | "'Port Name in Linux'" | ||
|' | | 'Alternate Port Name on Linux ' | ||
|'' | | "'Connector on controller'" | ||
|'' | | "'Note'" | ||
|- | |- | ||
|/dev/ttymxc0 | |/dev/ttymxc0 | ||
|/dev/ttyCONSOLE | |/dev/ttyCONSOLE | ||
| | | Controller debug-uart (micro-usb) | ||
| | | Default Settings: 115200-8-N-1 | ||
|- | |- | ||
|/dev/ttymxc1 | |/dev/ttymxc1 | ||
|/dev/ttyRS485-1 | |/dev/ttyRS485-1 | ||
| | | Signed "RS-485," terminal blocks A and B | ||
| | | Uninsulated port, terminator installed | ||
|- | |- | ||
|/dev/ttymxc3 | |/dev/ttymxc3 | ||
|/dev/ttyRS485-2 | |/dev/ttyRS485-2 | ||
| | | Signed "RS-485," terminal blocks A/L and B/H (this port can be used as CAN) | ||
| | | Uninsulated port, terminator installed, multiplexed with CAN | ||
|- | |- | ||
|/dev/ttymxc2 | |/dev/ttymxc2 | ||
|/dev/ttyMOD1 | |/dev/ttyMOD1 | ||
|UART | | UART on the extension module MOD1 | ||
| | | To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)" | ||
|- | |- | ||
|/dev/ttymxc4 | |/dev/ttymxc4 | ||
|/dev/ttyMOD2 | |/dev/ttyMOD2 | ||
|UART | | UART on the extension module MOD2 | ||
| | | To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)" | ||
|- | |- | ||
|/dev/ttymxc5 | |/dev/ttymxc5 | ||
|/dev/ttyMOD3 | |/dev/ttyMOD3 | ||
|UART | | UART on the extension module MOD3 | ||
| | | To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)" | ||
|- | |- | ||
|/dev/ttymxc6 | |/dev/ttymxc6 | ||
|/dev/ttyMOD4 | |/dev/ttyMOD4 | ||
|UART | | UART on the extension module MOD4 | ||
| | | To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)" | ||
|- | |- | ||
|/dev/ttymxc7 | |/dev/ttymxc7 | ||
|/dev/ttyGSM | |/dev/ttyGSM | ||
|UART | | UART on WBC expansion module (GSM/3G/4G modem connector) | ||
| | | To appear, you need to set any of the modems in wb-hardware.conf | ||
|- | |- | ||
|} | |} | ||
<div lang="ru" dir="ltr" class="mw-content-ltr"> | <div lang="ru" dir="ltr" class="mw-content-ltr"> | ||