Модуль релейных выходов 3A (WBIO-DO-R3A-8)/en: различия между версиями

* C and NS closed

* C and NO closed

|Maximum switching voltage, alternating current

| colspan="2" |250 V

|Maximum switching voltage, direct current

| colspan="2" |30 V

|Maximum switching current, per channel (*)

| colspan="2" |3 A

|The channel resistance in the open state

| colspan="2" |< 100 megohms

|Voltage isolation between the controller and the output

| colspan="2" |1500 V (RMS.)

|Lifetime: number of switches

for 10 A 230 V AC load, cos φ = 1

|Module type

|Maximum power consumption

| colspan="2" |1W

|Width, DIN units

|Size

| colspan="2" |53,3x90,2x57,5 mm

<nowiki>*</nowiki>) Maximum switching current is specified for 230 VAC resistive load.

[[File:DIN 3U.png |300px|thumb|right|Dimensions]]

== Connection to the controller ==

See [[Модули ввода-вывода/en#Activating the modules in the controller web interface|Activating the modules in the web interface of the controller]]. In the Module type field, select '''WBIO-DO-RxA-8: 8 Channel Relay I/O module'''. In the web interface the relay will be presented by the controls of EXT'''x'''_R3A1 — EXT'''x'''_R3A8 of the Discrete I/O devices. The corresponding MQTT-topics: /devices/wb-gpio/controls/EXT'''x'''_R3A'''y'''.

[[File:Wbio-do-rxa-8_controls.png|300px|thumb|right|Controls of the module in the web interface]]

== Load connection==

Relays are connected in a phase break.

[[Файл:Relay outputs.png|400px|thumb|none|Connection scheme]]