Модуль ввода-вывода с TTL-уровнями (WBIO-DIO-TTL-8)/en: различия между версиями
Строка 12: | Строка 12: | ||
==Technical specifications== | ==Technical specifications== | ||
Contains 8 I / | Contains 8 I/O channels with 5V voltage levels, the default channels are set as output. | ||
{| class="wikitable" | {| class="wikitable" |
Версия 19:41, 15 июля 2019
This model is discontinued.
For wholesale deliveries please email us info@contactless.ru
Purpose
Designed to connect devices with 5V TTL or 5V CMOS signals.
Technical specifications
Contains 8 I/O channels with 5V voltage levels, the default channels are set as output.
Parameter | Value |
---|---|
Number of I/O channels | 8 |
Isolated input groups | 1 |
I /O channel type | 5V GPIO |
A triggering condition of the channel in input mode | input supply 5V |
Condition for ending actuation of the channel in input mode | connection of the input with GND |
Minimum voltage of logic unit | 4 V |
Maximum logic zero voltage | 1 V |
Maximum output current per channel | 20 mA |
Maximum output current, all channels | 100 mA |
Overvoltage protection, up to | +60 V |
Module type | "O" (non-inverted address scheme) |
Maximum power consumption | 0.2 W |
Width, DIN units | 2 |
Size | 36,3x90,2x57,5 mm |
"'Terminals and wire section'" | |
---|---|
Recommended wire cross-section with TSVI, mm2 | 0,75 — 1 |
Length of the standard sleeve NSVE, mm | 8 (10 for adjusting screwless terminal blocks) |
Torque of screws, N∙m | 0,2 (for screw terminals) |
Connection
The controller, module and plug-in device must share a common ground.
Device pictures and drawings
По ссылкам ниже вы можете скачать изображения и чертежи устройства WBIO-DIO-TTL-8.
Corel Draw 2018: WBIO-DIO-TTL-8.cdr.zip
Corel Draw PDF: WBIO-DIO-TTL-8.cdr.pdf
Autocad 2013 DXF: Мы еще не подготовили чертеж этого устройства. Вы можете запросить чертеж устройства "Модуль ввода-вывода с TTL-уровнями WBIO-DIO-TTL-8" на портале техподдержки Wiren Board (необходима регистрация).