12 063
правки
(Новая страница: «Relays are certified only for use on alternating current, the load capacity of the DC may be lower. Each relay contact is protected from arcing when the varistor…») |
(Новая страница: «=== Relay parameters===») |
||
Строка 18: | Строка 18: | ||
Relays are certified only for use on alternating current, the load capacity of the DC may be lower. Each relay contact is protected from arcing when the varistor closes/opens. Depending on the Modbus register settings, the state of the inputs can be resumed after a power interruption (see [[#Relay operation mode in case of power loss]]). The table below lists the technical characteristics of the relays used in the module. | Relays are certified only for use on alternating current, the load capacity of the DC may be lower. Each relay contact is protected from arcing when the varistor closes/opens. Depending on the Modbus register settings, the state of the inputs can be resumed after a power interruption (see [[#Relay operation mode in case of power loss]]). The table below lists the technical characteristics of the relays used in the module. | ||
=== | === Relay parameters=== | ||
Наша подробная статья на habr.com о выборе параметров реле для коммутируемой нагрузки: https://habr.com/ru/company/wirenboard/blog/422197/ | Наша подробная статья на habr.com о выборе параметров реле для коммутируемой нагрузки: https://habr.com/ru/company/wirenboard/blog/422197/ |
правки